diff options
Diffstat (limited to 'arch/mips/bcm63xx/setup.c')
-rw-r--r-- | arch/mips/bcm63xx/setup.c | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c new file mode 100644 index 000000000..d811e3e03 --- /dev/null +++ b/arch/mips/bcm63xx/setup.c | |||
@@ -0,0 +1,170 @@ | |||
1 | /* | ||
2 | * This file is subject to the terms and conditions of the GNU General Public | ||
3 | * License. See the file "COPYING" in the main directory of this archive | ||
4 | * for more details. | ||
5 | * | ||
6 | * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> | ||
7 | */ | ||
8 | |||
9 | #include <linux/init.h> | ||
10 | #include <linux/kernel.h> | ||
11 | #include <linux/delay.h> | ||
12 | #include <linux/memblock.h> | ||
13 | #include <linux/ioport.h> | ||
14 | #include <linux/pm.h> | ||
15 | #include <asm/bootinfo.h> | ||
16 | #include <asm/time.h> | ||
17 | #include <asm/reboot.h> | ||
18 | #include <asm/cacheflush.h> | ||
19 | #include <bcm63xx_board.h> | ||
20 | #include <bcm63xx_cpu.h> | ||
21 | #include <bcm63xx_regs.h> | ||
22 | #include <bcm63xx_io.h> | ||
23 | #include <bcm63xx_gpio.h> | ||
24 | |||
25 | void bcm63xx_machine_halt(void) | ||
26 | { | ||
27 | pr_info("System halted\n"); | ||
28 | while (1) | ||
29 | ; | ||
30 | } | ||
31 | |||
32 | static void bcm6348_a1_reboot(void) | ||
33 | { | ||
34 | u32 reg; | ||
35 | |||
36 | /* soft reset all blocks */ | ||
37 | pr_info("soft-resetting all blocks ...\n"); | ||
38 | reg = bcm_perf_readl(PERF_SOFTRESET_REG); | ||
39 | reg &= ~SOFTRESET_6348_ALL; | ||
40 | bcm_perf_writel(reg, PERF_SOFTRESET_REG); | ||
41 | mdelay(10); | ||
42 | |||
43 | reg = bcm_perf_readl(PERF_SOFTRESET_REG); | ||
44 | reg |= SOFTRESET_6348_ALL; | ||
45 | bcm_perf_writel(reg, PERF_SOFTRESET_REG); | ||
46 | mdelay(10); | ||
47 | |||
48 | /* Jump to the power on address. */ | ||
49 | pr_info("jumping to reset vector.\n"); | ||
50 | /* set high vectors (base at 0xbfc00000 */ | ||
51 | set_c0_status(ST0_BEV | ST0_ERL); | ||
52 | /* run uncached in kseg0 */ | ||
53 | change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); | ||
54 | __flush_cache_all(); | ||
55 | /* remove all wired TLB entries */ | ||
56 | write_c0_wired(0); | ||
57 | __asm__ __volatile__( | ||
58 | "jr\t%0" | ||
59 | : | ||
60 | : "r" (0xbfc00000)); | ||
61 | while (1) | ||
62 | ; | ||
63 | } | ||
64 | |||
65 | void bcm63xx_machine_reboot(void) | ||
66 | { | ||
67 | u32 reg, perf_regs[2] = { 0, 0 }; | ||
68 | unsigned int i; | ||
69 | |||
70 | /* mask and clear all external irq */ | ||
71 | switch (bcm63xx_get_cpu_id()) { | ||
72 | case BCM3368_CPU_ID: | ||
73 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368; | ||
74 | break; | ||
75 | case BCM6328_CPU_ID: | ||
76 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328; | ||
77 | break; | ||
78 | case BCM6338_CPU_ID: | ||
79 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338; | ||
80 | break; | ||
81 | case BCM6345_CPU_ID: | ||
82 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_6345; | ||
83 | break; | ||
84 | case BCM6348_CPU_ID: | ||
85 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348; | ||
86 | break; | ||
87 | case BCM6358_CPU_ID: | ||
88 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358; | ||
89 | break; | ||
90 | case BCM6362_CPU_ID: | ||
91 | perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362; | ||
92 | break; | ||
93 | } | ||
94 | |||
95 | for (i = 0; i < 2; i++) { | ||
96 | if (!perf_regs[i]) | ||
97 | break; | ||
98 | |||
99 | reg = bcm_perf_readl(perf_regs[i]); | ||
100 | if (BCMCPU_IS_6348()) { | ||
101 | reg &= ~EXTIRQ_CFG_MASK_ALL_6348; | ||
102 | reg |= EXTIRQ_CFG_CLEAR_ALL_6348; | ||
103 | } else { | ||
104 | reg &= ~EXTIRQ_CFG_MASK_ALL; | ||
105 | reg |= EXTIRQ_CFG_CLEAR_ALL; | ||
106 | } | ||
107 | bcm_perf_writel(reg, perf_regs[i]); | ||
108 | } | ||
109 | |||
110 | if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) | ||
111 | bcm6348_a1_reboot(); | ||
112 | |||
113 | pr_info("triggering watchdog soft-reset...\n"); | ||
114 | if (BCMCPU_IS_6328()) { | ||
115 | bcm_wdt_writel(1, WDT_SOFTRESET_REG); | ||
116 | } else { | ||
117 | reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); | ||
118 | reg |= SYS_PLL_SOFT_RESET; | ||
119 | bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); | ||
120 | } | ||
121 | while (1) | ||
122 | ; | ||
123 | } | ||
124 | |||
125 | static void __bcm63xx_machine_reboot(char *p) | ||
126 | { | ||
127 | bcm63xx_machine_reboot(); | ||
128 | } | ||
129 | |||
130 | /* | ||
131 | * return system type in /proc/cpuinfo | ||
132 | */ | ||
133 | const char *get_system_type(void) | ||
134 | { | ||
135 | static char buf[128]; | ||
136 | snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)", | ||
137 | board_get_name(), | ||
138 | bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); | ||
139 | return buf; | ||
140 | } | ||
141 | |||
142 | void __init plat_time_init(void) | ||
143 | { | ||
144 | mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; | ||
145 | } | ||
146 | |||
147 | void __init plat_mem_setup(void) | ||
148 | { | ||
149 | memblock_add(0, bcm63xx_get_memory_size()); | ||
150 | |||
151 | _machine_halt = bcm63xx_machine_halt; | ||
152 | _machine_restart = __bcm63xx_machine_reboot; | ||
153 | pm_power_off = bcm63xx_machine_halt; | ||
154 | |||
155 | set_io_port_base(0); | ||
156 | ioport_resource.start = 0; | ||
157 | ioport_resource.end = ~0; | ||
158 | |||
159 | board_setup(); | ||
160 | } | ||
161 | |||
162 | int __init bcm63xx_register_devices(void) | ||
163 | { | ||
164 | /* register gpiochip */ | ||
165 | bcm63xx_gpio_init(); | ||
166 | |||
167 | return board_register_devices(); | ||
168 | } | ||
169 | |||
170 | arch_initcall(bcm63xx_register_devices); | ||